|
|
|
|
|
地點：昆山市周市鎮周新公路20號
接洽人：王司理 13913227719
傳真：0512-55162719
E-mail:tozsen@163.com |
|
|
|
|
|
|
| 以后地位：首頁 > 產物中間 > 風冷式冰水機 |
|
| 風冷式冰水機 | 
TIC-A 編風冷式純凈水機容納單吸泵蒸氣緊繃雙回路，并具備緊繃機超負荷掩體、泵浦超負荷掩體、逆相缺相警告、避免出現結水掩體、高
高有壓力無球等自動裝配，產品機可相同，保修期長。 可極速散熱， 控溫相同，知足客表單提交。 此系例物品基本支配冷熱水互相交換的原因
停掉工作任務。好用于古時候工業中的水冷卻領域，且不會受原因室溫的印象，是沒有可或缺的如何設置裝備陳設裝備。
TIC-A series of air cooled chiller adopts single stage steam compression circuit, and has compressor overload protection, pump overload
protection, reverse phase absence warning, prevent water formation protection, high and low pressure protection devices, stable performance,
long service life. Fast cooling, stable temperature control, to meet customer requirements. This series of products mainly apply the principle of heat and cold exchange to work. Applicable to the cooling field in modern industry, and is not affected by the ambient temperature, is an indispensable configuration equipment.
冷卻塔環境溫度投資規模 5C- 35C;
冷庫保溫隔熱板的表層保溫儲水箱，防有冰擋拆裝配 ;
制冷壓縮機壓縮機劑容納 R22，制冷壓縮機壓縮機導致好 ;
冰凍二次回路認同高、各類高壓打開規范 ;
緊縮性機及泵浦均遇過載無球 ;
容忍邦普我的電腦溫度控制器精密度達 ±0.1C;
操作快捷，結構簡化，容易維修培訓 ;
直流電泵浦為規范性裝置，另可選擇用中壓或直流電泵浦 ;
待選改變布置的裝備虛設無塔供水設備水箱液位計 ;
悅納自己谷輪緊縮性機 ;
TIC-A 風冷式采納套片式閉式冷卻塔器，熱傳遞結局佳，cpu散熱快，必須供應閉式冷卻塔水 ;
改建成歐規平靜控制回路型時，cpu類型后加液“CE”
Cooling temperature range 5C-35C;
Stainless steel insulated water tank, anti-icing protection device;
R22 refrigerant, good refrigeration effect;
The cryogenic circuit is controlled by high and low pressure switches.
Compressor and pump have overload protection;
Bang Pu computer temperature controller accuracy of ±0.1C;
Easy to operate, simple structure, easy to maintain;
Low pressure pump is standard, medium pressure or high pressure pump can be selected;
Optional addition of tank level gauge;
Adopt grain rotary compressor;
TIC-A air-cooled using sleeve condenser, heat transfer effect is good, fast heat dissipation, no need to provide cooling water;
When changing to EC safety loop type, add "CE" after the model
TIC-A 一系列冰水機主要由收斂機、冷凝水機、熱能收斂閥盒汽化器這幾種部分涉及，寬容雙吸式水蒸氣收斂空調氟里昂網絡體系，調控空調氟里昂劑的液固相互轉化，吸收盒開釋形成的啟示，運到空調氟里昂的的結果。
TIC- A 產品啟動后，縮緊機 (1) 起頭神器任務，冷庫安裝小編劑在縮緊機的縮緊作用下變身成為髙壓高溫氣物，往 A-B 的標底必要性循環 ; 在 B-C-D的的速度，髙壓高溫的冷庫安裝小編劑氣物依靠的的速度空調蒸發器器 (2)，與文化積極性導致熱交換，由氣態優化為液體狀態氨，還被文化積極性會帶走糖份 ; D-E 的的速度，液體狀態氨的髙壓冷庫安裝小編劑依靠的的速度熱能回縮閥 (5)，氣壓飛機起飛，線條冷庫安裝小編劑由液體狀態氨優化為氣態，倘若冷庫安裝小編劑為液體狀態氨和藹態兩相混雜的管理狀況 ;
E- A 流程中，制冰劑沿途流程減壓蒸餾掉器 (6)，在減壓蒸餾掉器內與保壓引言產生熱調換，保壓微凍水到所必需的的溫度，知足重設要求 ; 經減壓蒸餾掉器后的廢氣制冰劑生死宿命趕回到收窄機，達成以此制冰生死宿命。
TIC- A air- cooled water chillers include four main components, such as compressor, condenser, thermostatic expansion valve and evaporator.
The system adopts a single closed loop design for refrigeration system. Refrigerant is alternatively changed from ga尋找組件推廣us to liquid state to absorb or release heat thus a cooling effect is achieved. When the machine is started, compressor starts working. Refrigerant is compressed into high pressure and high temperature gas in the process from A to B. In the process From B to C and D, this high pressure and high temperature gas is cooled when it is passing through the condenser and changed into liguid. Heat is taken away by the cooling air. In the process from D to E, the pressure of liquid refrigerant is reduced by expansion valve and a part of the refrigerant is changed from liquid to ga尋找組件推廣us state. In the process from E to A, refrigerant absorbs the heat of process water in the evaporator and returns back to the compressor. This heat exchange process repeats until process water is cooled down to required temperature.
   
注：
1) 安真小編就可以是可根據留水頭攝氏度 12C，情況下攝氏度 30°C 下精確測量 ;
2) 在 3φ，230V 時，收緊機示例為活塞件式 (TIC-3A~TIC-5A);
3) 制冷壓縮機劑可供選擇擇 R407C 環保節能型空調制冷劑 ( 用 U 表達，不是而是 : TIC-5A-U);
4) 此泵浦為內銷及內銷西南亞絕配，顧客可依要暴走換裝中壓泵浦，目空一切 : TIC-5A-P)，
也可狂戰換裝壓力泵浦 ( 用 HP 體現，氣沖斗牛 : TIC-5A-HP)，詳實參數設置順次如上如圖是 ;
5) 該風冷式生水機共用于事情體溫 35℃之下的支配首要條件 ;
6) POS機電流值可按潛在客戶post請求尤其是采購。
Note：
1) The refrigeration capacity is measured according to the outlet temperature of 12C and the ambient temperature of 30°C;
2) at 3φ, 230V, the compressor type is piston type (TIC-3A~TIC-5A);
3) Refrigerant R407C environment-friendly refrigerant (represented by U, for example, TIC-5A-U);
4) This pump is standard for domestic and export sales in Southeast Asia, customers can replace the medium pressure pump according to demand, such
as: TIC-5A-P),
High pressure pumps can also be replaced (represented by HP, for example: TIC-5A-HP), the specific parameters are shown as above;
5) The air-cooled chiller is suitable for use under the ambient temperature of 35℃;
6) Machine voltage can be ordered according to customer's special requirements. | | |   |
|
|
| 
